How To Polish Your Car (Step-By-Step Instructions)

Introduction

Polishing your car is important to maintain its showroom-new look. It’s also something you can do at home with the right equipment and techniques. The following steps will help you get started:

1.Get A Good Set Of Car Polishes

To get the best results and make your car look its best, it’s important to use a good set of car polishes. Your choice of polish will depend on which step you’re working on. With that in mind, here are some things to consider when selecting a polish:

• Do I want one product that can do everything? – If you want a versatile product that will work well on every surface, look for one with a cleaner/polish/wax combination.
• How much money am I willing to spend? – You can spend anywhere from $15-$100 or more per product depending on how much waxing power and durability you need. Some products are better than others when it comes to long lasting durability but they might not give as deep of shine so keep that in mind when making comparisons between brands (see the section below).

2.Wash Your Car First

Wash Your Car First

When you are performing a full paint correction, the first step is to wash your car thoroughly. This will remove contaminants from the surface of your paint and also get rid of any wax buildup that may have occurred over time. Using a waterless car wash product is an excellent way to wash your vehicle without using soaps or detergents on the paint. A great example is Optimum No Rinse (ONR), which can be applied with a spray bottle and rubbed into the surface of your vehicle using a soft microfiber towel or horse hair brush. Once you’ve worked ONR into all areas of the car, rinse off with fresh water and dry it completely with another microfiber towel being careful not to leave any streaks behind!

3.Clean The Wheels And Tires

• Clean the wheels and tires. If your car has alloy or chrome-plated wheels, use a wheel cleaner to remove any brake dust or road grime build up. For other types of wheels, you can use a tire cleaner spray or brush applicator to get the same result.
• Wash the tires with soapy water using a sponge and/or soft brush, then rinse thoroughly with clean water.
• Dry off any excess moisture from the tires with a towel before applying polish or dressing to them (this step is optional).
• For additional shine and protection for your rims, apply tire shine onto each wheel in circular motions until the desired amount of glossiness has been achieved.

4.Clay Bar The Paint

• Claying the Paint

Clay is a very effective way to remove surface contaminants, such as dirt and pollution residue, which can become embedded into the paint’s clear coat over time. It also helps restore original luster by removing light oxidation and increasing shine. The clay bar kit comes with a block of clay (or two), which you’ll use in various steps throughout your polishing process. If you’re not using a kit like this one from Mothers, I recommend buying one from an automotive supply store—the ones sold at big-box retailers tend not to be quite as good quality as those sold elsewhere for about $10 more per bar (and they’re definitely worth it).

5.Paint Correction Using Machine Polishers

You have to have a machine polisher. You may be able to get away with doing this job by hand, but it’s going to take you a long time and you won’t be able to get the results that you want. We recommend the Porter Cable 7424XP as it is one of the most popular machines on the market today and it has an excellent reputation.

The first step in using your machine polisher is cleaning all of the dirt off of your car using soap and water and then drying it off with towels before you start any work. Once this is done, we recommend applying some wax onto a foam pad (not cotton) and running that over all surfaces of your car, being careful not to apply too much pressure when doing so as this could cause damage if too hard pressed against paintwork! The next thing is putting on some polish which should be applied evenly across each section until fully covered in liquid; after about 2-3 minutes then remove any excess residue from those areas using either rags or paper towels (just don’t use anything abrasive like steel wool!). Finally wash out again with clean water before adding another coat of protective sealant over top – these last two steps will help protect yourself against UV rays while also adding shine back into dulled areas!

6.Apply A Paint Sealant Or Carnauba Wax After Polishing Your Car

After you’ve polished your car, it’s time to protect the newly-shined paint job. You can do this by applying a paint sealant or carnauba wax. These products are available at any auto parts store and will keep your car looking great for years to come.

To apply these products:

• Squirt an ample amount of product onto a clean microfiber towel
• Rub the paint surface in small circles until the entire area is covered with the sealant or wax (do not allow it to dry)

Polishing your car is necessary to maintain its showroom new look and can be done by any car owner with the right set of tools and techniques.

Polishing your car is necessary to maintain its showroom new look and can be done by any car owner with the right set of tools and techniques.

The first step in polishing a car is washing it. You should wash your vehicle at least once every month, or more often if you drive in rain or snow. The dryer your car gets between washes will also help ensure that you don’t cause any swirl marks while polishing.

Once you’ve washed your vehicle, use a microfiber towel to dry it off as much as possible before moving on to the next step (this will prevent water spots). When you do car polish you need to use the right tool in order not to damage the car paint.

Conclusion

Polishing your car is a fun and rewarding way to keep it looking great. Follow these steps, and you will have a showroom new look in no time! Go to https://www.waxit.com.au/ for polisher products.